Oil heated to operating temperature (starting from approximately 50°C): Start the engine, set the front wheels straight. Unscrew the threaded plug with the dipstick. Wipe the dipstick with a clean cloth. Screw the cap on by hand and unscrew it again.
Check the oil level. Oil when cold: The oil level should be in the MIN mark area (up to 2 mm above or below the mark, respectively).
The oil is heated to operating temperature (approximately 50°C): The level should be between the MIN and MAX marks.
Instructions: After unscrewing the screw plug "arrows" take into account the marks "Min" and "Max". After screwing the screw plug take into account the marks "Min" and "Max" on the tank. If the oil level is above the specified area, the oil should be pumped out. If the oil level is below the specified area, the hydraulic system should be checked for leaks. In this case, one top-up of oil is not enough. If the hydraulic system is leak-proof, fill in oil "G 002 000".
(The original text of the material can be found on the website: AUDImanual.ru)