- Install the car horizontally.
- After starting the engine at idle, fully shift the steering two or three times, set the front wheels to the straight ahead position and stop the engine.
- To maintain accuracy, the engine must be warmed up to operating temperature, after the engine has stopped, do not turn the steering wheel any more.
1. The power steering reservoir is located on the left side of the engine compartment. Slowly unscrew the cover in which the dipstick is embedded.
2. Make sure the fluid level is between the MIN and MAX marks, preferably closer to the MAX mark. If necessary, wipe the dipstick clean with a rag, screw on the cap and unscrew it again.
3. If topping up is required, top up with the type prescribed, up to the MAX mark. After completing the procedure, close the lid.
Safety first!
Frequent need to top up fluid indicates a leak that must be repaired immediately.
Visitor comments