Table of contents: High-mounted brake light, license… ↓ Removal and installation the high… ↓ Removal and installation the license… ↓
High-mounted brake light, license plate light
1. License plate light.
2. License plate light bulb: left license plate light bulb "X4", right license plate light bulb "X5"; 12 V, 5 W.
3. High stop light: High stop light bulb "M25".
Removal and installation the high brake light bulb "M25"
Do not press the brake pedal. Pull the upper brake light "2" on the "arrow" trim downwards evenly in the direction of travel. Disconnect the plug connection "1".
Installation
Installation in reverse order. If the LED is faulty, the high-mounted brake light assembly must be replaced. The "2" fastening of the high brake light "3" must engage evenly, left and right, with the guide rail "1". Evenly, without distortion, push the high brake light forward in the direction of the "arrow" until you hear a click.
Removal and installation the license plate light "X4"/"X5"
Set the light switch to position 0. Remove license plate light "2" from the trunk by inserting screwdriver "1" into the slot and sliding it in the direction of the arrow. Remove bulb "3" from the chuck.
Installation in reverse order. If the LED is damaged, replace the entire license plate light.