Seat occupancy recognition system
Attention! Spare part (repair kit) seat occupancy sensor (option for some countries) it is already pre-calibrated and should not be separated under any circumstances. The repair kit consists of: a used seat occupied sensor "J706", a pressure sensor "G452", a seat occupied mat, a seat cushion, and a wiring harness between the seat occupied sensor control unit "J706" and the pressure sensor "G452". Observe safety regulations. when working with the seat occupancy sensor. The seat occupancy sensor is installed only in the front seat. passage..
1. Seat occupancy detection pressure sensor "G452": a single part with a seat occupancy detection mat; do not disconnect the plug connection.
2. Seat base.
3. Mounting clamp.
4. Pillow; for the seat base; do not separate from the mat to determine the occupancy of seat "6".
5. Fastening clamp: unlocking is prohibited.
6. Mat: for seat occupancy sensor; single part with pressure sensor for determining seat occupancy "G452"; do not detach from seat cushion "4".
7. Fastening of used seat occupancy sensor "J706".
8. Expansion pin: for fixing the seat base mount.
9. Wiring harness: Do not disconnect from the seat occupied pressure sensor "G452" and the used seat occupied sensor "J706".
10. Front seat position sensor. passage. "G554": is a component of the "9" wire harness.
11. Used seat occupancy detection "J706": do not disconnect the plug connection.