Table of contents: Radio tape recorder "chorus",… ↓ New generation of radio tape… ↓ Navigation system Plus ↓
The radios are supplied with a fixed code. Each radio is programmed with a special individual code. This hard-coded code is not yet activated at the factory. The protective coding of the ready-to-use device is activated only when the hard-coded code is entered.
Radio tape recorder "chorus", "concert", "symphony"
Turn on the radio. Press the TP and RDS buttons simultaneously and hold until the digital display shows "1000". Release the buttons!
New generation of radio tape recorders
Press the RDS and SCAN keys simultaneously and hold until the digital display shows "1000". Release the keys! Using the station switching keys 1 - 4, enter the code pasted on the radio card. In this case, key 1 enters the first digit of the code, key 2 - the second digit, etc. After this, the TP and RDS keys (new generation with RDS and SCAN functions) press and hold simultaneously until the word "SAFE" appears in the frequency display field. Release the buttons! After a while, the frequency will be displayed automatically.
Navigation system Plus
Press and hold the NAVIGATION and DISPLAY keys simultaneously until the permanent code input mask appears. Release the buttons! Turn/Press the button to select the permanent code digits from the digital line in sequence and confirm each of them by pressing the button. The digits are entered in the 4-digit field located below. The permanent code number is pasted into the radio card (in the operating manual). Select the "OK" field by turning/pressing the button and confirm by pressing. If the correct permanent code is entered, the radio switches to normal operation.
[The original article is available on the website: audimanual.ru]