Table of contents: Front door glass ↓ Removal and installation door glass ↓
Front door glass
The window regulator must be installed before the glass is mounted.
1. Door glass.
2. Window regulator: do not remove the door glass to remove it.
3. Door.
4. Nut: 6 Nm.
5. Speaker.
6. Bolt: 1.5 Nm.
7. Bolt: 6 Nm.
8. Overlay: unlock.
Removal and installation door glass
1. Door glass: door trim and speaker removed; to remove, disconnect the "arrow" clips from the "2" sprocket using a screwdriver and slightly lift the "1" glass in the guide; tilt the glass forward and remove it from the door by moving it upwards.
2. Window lifter: The window lifter is built into the door.
Glass detachment
Lower the window. Using, for example, a screwdriver, push the star "3" outward through the groove in the glass guide "1" and through the hole in the door glass "2" and thereby unlock it. Remove the glass upwards from the sprocket. Tilt the glass forward and pull it upward with the glass guide.
Installing door glass
Insert door glass "1" at an angle forward into the door glass guide. Align the glass in the guides at the front and back and lower it down. Press the glass down into the star. In this case, the star is attached to the glass.
