Table of contents: Rear window, sedan ↓ Rear mounting diagram. glass, Avant ↓
Rear window, sedan
1. Rear window: distance "a" to the roof = 2 mm; align the gap "d" to the D-pillar; before removing, disconnect all plug connectors and secure the contacts inward, towards the center of the glass, with adhesive tape.
2. Glue roller: roller width = 8 mm + 2 mm. roller height = 12 mm + 2 mm; distances to the edge of the glass: size "b" = 16.5 mm, size "c" = 21.5 mm, size "e" = 16.5 mm.
3. Buffer: stick 3 marks along the top and bottom edges of the glass.
4. Profile for adhesive fencing: distance to the edge of the glass f = 24 mm; stick the adhesive barrier profile in the immediate vicinity of the glass heating busbar; the adhesive must not come into contact with the rear heating busbar. glass.
Rear mounting diagram. glass, Avant
1. Rear window.
2. Glue roller. Different distances to the glass edge: distance "a" = 11 mm, size "b" = 38.5 mm, size "c" = 12.5 mm, size "d" = 3 mm.
3. Upper brake light: do not remove when dismantling the rear. glass.
4. Glue barrier profile: must be glued before applying glue near the rear heating busbars. glass; install the inner edge of the adhesive guard profile onto the outer edge of the rear heating busbar. glass and press; the adhesive must not come into contact with the rear heating busbar. glass.
5. Buffer: glued in quantity of 3 at the lower and upper edges of the glass.