2. Remove the front sound insulation casing (see illustration 5.5 Chapter 2).
3. Remove the front bumper (see Chapter 11).
4. Remove the bolts (And in the illustration) and disconnect the refrigerant lines from the condenser.
14.4. Fastening (A) of refrigerant lines
5. Remove the air ducts between the bumper and the condenser. If necessary, loosen the fasteners of the power steering fluid radiator (see Chapter 10).
6. If necessary, loosen the fan control unit fasteners or remove it.
7. Disconnect the connector (In the illustration) high pressure sensor wiring, unscrew the bolts (A) and remove the capacitor.
14.7. Bolts (A) for fastening the condenser
8. Installation is performed in the reverse order of component removal. Use new refrigerant line sealing rings.
[This publication is borrowed from the resource: AUDIMANUAL]