1. Disconnect the negative cable (-) battery.
Warning: Follow the instructions in Section Replacing the battery.
Remove the door upholstery, refer to Section Removal and installation of facing of a forward door.
Exterior mirror adjustment switch
1. Disconnect the connector (1) switch.
2. Loosen with a small screwdriver (arrows) locking hooks and remove the door mirror adjustment switch (2) down from the door trim.
3. When installing, insert the switch cover into the armrest in front of the switch.
Double power window switch
1. Loosen with a small screwdriver (arrows on the accompanying illustration) locking hooks and remove the power window switch (1) down from the door trim.
2. Disconnect the connector (2) switch (1).
4-gang power window switch
1. Press the lock bar (arrows on the accompanying illustration) and free.
2. Loosen with a small screwdriver (arrows) locking hooks and remove the door mirror adjustment switch (2) down from the door trim.
3. Disconnect the connector (3) switch (2).
Single lock switch
1. Disconnect the connector (2) switch (1).
2. Press the single lock switch out of the door upholstery (1) (arrow on accompanying illustration).
Button in driver's door pocket
1. Disconnect the key connector (1) And (2).
2. Release the locking hooks (arrows) and press the key back out of the upholstery.
3. Installation is carried out in the reverse order of removal.
Visitor comments