Table of contents: Removal ↓ Installation ↓
The operation of lifting and installing the car on stands is associated with danger! Therefore, before carrying out the operation, read the Section Jacking and towing.
Removal
1. Mark the tires with arrows indicating the direction of rotation. Loosen the wheel mounting bolts. Raise and support the front of the car and remove the wheels.
2. Right side of the vehicle: Remove the bolts (3).
3. Unscrew the bolts (2), disconnect the liner (1) and remove it downwards from the wing. (4) – expansion nut.
Installation
1. Installation is performed in the reverse order of removal.
2. Secure the wheel, observing the direction of its rotation. Lower the car onto the wheels and only then tighten the wheel mounting bolts crosswise with a torque of 120 Nm.