Table of contents: Removal ↓ Installation ↓
Removal
Open the trunk lid.
Remove the trim where the tail light is located.
Fig. 18–42. Rear light mounting elements in the wing: 1 – cover; 2 – latch; 3 – nuts; 4 – rear light
Turn latch 2 (see Fig. 18–42) of the rear light cover 1 fastening counterclockwise.
Remove the holder with bulbs from the rear light.
Unscrew the four nuts 3 securing the light and remove the light 4 from the outside of the vehicle.
Installation
When installing the light, make sure the gasket is properly positioned between the light and the vehicle body.
Installation is carried out in the reverse order of removal.
Before tightening the light mounting nuts, check that the gaps between the light and the wing recess are equal.
(The original version of the article is posted on the website Audimanual.ru)