Fig. 18–45. Upper brake light: 1 – housing; 2 – screw; 3 – lamp holder; 4 – lamp; 5 – diffuser
Remove the rear brake light cover 1 by moving it forward (Fig. 18–45).
Unscrew two screws 2 and remove the holder 3 with the lamps.
Remove four bulbs (12 V, 5 W) from the holder.
The electrical connector for the high-mounted brake light is located on the bulb holder.
The high brake light diffuser is secured to the trunk side with two screws.
Installation is carried out in the reverse order of removal.
(Read the original source on the website «AUDImanual»)