Withdrawal
30. Disconnect the wire "masses" from the battery.
31. As described in chapters 11 and 12, do the following:
- A) Remove the glove box from the front panel.
- b) Remove the passenger airbag mounting bracket.
32. Working under the front panel on the passenger side, disconnect the wiring connector from the rear of the blower motor assembly.
33. Remove the four screws, rotate the motor slightly and remove it from the heater/evaporator housing. On models since 1997, the motor can be removed from the base by disconnecting the wiring connectors and releasing the latches.
Installation
34. Installation - reverse procedure.
Visitor comments