1. Orthopedic element. Remove the seat. Shine the soft upholstery of the seat back. Drill the rivets on the outside of the lordosis system motor "5". Disconnect the plug connector "4" of the lordosis system motor "5". Remove the lower springs "3" (2 pcs.). Remove the upper springs "6" (2x) from the longitudinal reinforcement "7". Bend back the retaining pads "8" (2x). Remove the longitudinal reinforcement "7" from the lower lugs "2" by pressing outward
2. Lower eyes (2x)
3. Small springs (2x)
4. Plug connector of the lordosis system motor
5. Lordosis system motor
6. Large springs (2x)
7. Longitudinal reinforcement
8. Fixing tabs (2 pcs.)
9. Cable
10. Upper eyes (2x)