Sedan only
Removal
Remove the door frame
Remove the lock washer "2", remove the spacer and shock absorber washers.
Remove the glass from the window regulator tray.
Bend clamp "7" in the direction of the arrow and press the cable out of the clamp.
Unscrew the 3 bolts "6" of the window lifter. Unscrew the 3 fastening nuts of the electric window lifter.
Unscrew 2 bolts "16" and remove the window regulator.
Installation
Secure the window lift with a force of 6 Nm.
Place the shock absorber washer and insert the window.
Place the shock absorber and spacer washers, insert the lock washer.
If removed, insert the sealing plug into the window guide from below. The distance from the plug to the bottom end of the window guide should be 65 mm.
Install the door frame and insert the glass.
