Removal and installation the window lifter and door glass (Audi A2)

1. Bracket for built-in door parts
2. Door glass. Loosen the bolt and open the hinge. Remove the glass downwards from the guides. Installation: Insert the glass into the guides and press it against the B-pillar gasket. Raise the glass (insert into the door seal) and tighten the bolt to 4 Nm. Then lower the glass
3. Folding hinge
4. Bolt Tough, 4 Nm
5. Blind rivet. Observe the sequence of riveting.
6-8. Blind rivet
9. Window regulator. Remove the window regulator motor. Remove the bracket of the built-in door parts. Drill out the rivet heads and knock out the pins. It is necessary to remove the pins from the bracket. Installation: Connect the window regulator with rivets in the sequence