Window lift motor, window lifter 1. Door; 2. Window regulator. The door glass has been removed; 3. Door glass; 4. Nut. 6 Nm; 5. Gasket; 6. Bolt. 3 pcs. 3.5 Nm; 7. Window lift motor
Removing the power window motor 1. Email connector Disconnect the plug connector from the door control unit; 2. Electric window lift motor. Can be removed and installed in any position of the electric motor or door glass. Removal: Remove the door trim. Unscrew the bolts -6- and remove the electric motor from the window regulator. Installation: The clamps -arrow- of the window lifter threaded pins must be secured in the inner door panel. Place the window lift motor onto the threaded pins and tighten the bolts -6-. With the power window switches connected, turn on the ignition and raise the door windows all the way. Hold the power window switch for approx. 2 seconds to activate the basic adjustment and the raising and lowering function; 3. Threaded pins; 4. Window regulator; 5. Bolt. 3.5 Nm
Visitor comments