1. Front door lock. Remove the door trim. Remove the mounting bracket. Disconnect the drive rod from the door handle. Unscrew the combination bolts. Pull the door lock downwards out of the door
2. Flexible cable in sheath. To remove, disconnect from door lock "arrow c". Bend flexible cable in sheath approx. 90° downwards and remove it from door lock actuator lever. To install, pull flexible cable in direction of arrow "a", turn it 90° upwards and insert into door lock "arrow c"
3. Cap
4. Gasket. When installing, insert from the side.
5. Combination bolt, 20 Nm
Removal the adjustment rod
If the previous door lock is installed, it is necessary to remove the drive rod -1. at the clamp "2" from the drive lever.