To remove, detach from the door from below and remove from the bracket of the built-in door parts from above. When installing, first position the rubber corner "arrow a" at the junction of the door and the bracket of the built-in door parts using the locking ledge at the edge of the door. Insert the gasket into the bracket of the built-in door parts from above in the direction of arrow "b". Fix the rubber corner "arrow c" at the junction of the door and the bracket of the built-in door parts. Insert the clamps from top to bottom along the entire perimeter of the door. Remove the protective film from the adhesive surface and press the gasket to the door next to the lock.
(The original article is available on the website: audimanual.ru)