1. Door lock cylinder. Pull the handle out and hold it in this position. Loosen bolt -arrow C- counterclockwise using socket wrench -T10072- until stop. After unscrewing the bolt, the door handle is fixed in the extended position. Remove the lock cylinder together with the key from the door handle mount
2. Fixing the door handle
3. Door handle. Before removing, dismantle the door lock cylinder. Pull the door handle down and remove it outwards. When installing, make sure that the seal on the door handle is behind the door leaf. The lug must engage with the retaining clip
Door handle retainer
After unscrewing the retaining clip -1- with the bolt -2- until it stops, the door handle is locked in the extended position by means of the catch -arrow-.
Visitor comments