Front seat
1. Move the seat all the way back and remove the front mounting bolt (photo).
2. Move the seat all the way forward and unscrew the rear fastener (photo).
3. Where equipped, disconnect the seat heater wiring harness.
4. Remove the seat from the vehicle.
5. Installation is carried out in the reverse order.
Back seat
6. Using a lever, remove the covers from the mounting screws on the front edge of the gasket, then remove the screws (photo).
7. Raise the front of the gasket and remove it forward.
8. Bend the two metal arches that secure the base of the backrest, release the backrest, then lift it up to release the two top hooks from the shelf panel.
9. Installation is carried out in the reverse order.
Visitor comments