8.0. Air filter. Cars with gasoline engine:
1 - air ducts
2 - replaceable air filter element
3 - clamp
4 - air filter cover
5 - sealing ring
6 - mass air flow sensor
7 - bolt. Tightening torque -10 Nm
8 - rubber mounting pad
9 - spacer sleeve
10 - gasket
11 - Air filter housing
8.0a. Air filter. Vehicles with diesel engine:
1 - protective cover
2 - air duct
3 - mass air flow sensor
4 - bolt. Tightening torque - 10 Nm
5 - throttle valve supply air duct
6 - sealing ring
7 - Air filter cover
8 - rubber mounting pad
9 - Replaceable air filter element
10 - Air filter housing
Removal
Cars with gasoline engines
1. Remove the air filter cover 1 (see illustration).
8.1 Remove the air filter cover 1
2. Remove the air duct 2 (see illustration 8.1).
3. Disconnect the 4 mass air flow sensor connectors (see illustration).
8.3. Disconnect the 4 mass air flow sensor connectors
4. Cars with AJK, ARE, AZA engines. Disconnect the remaining plugs of the 4 ignition coils (see illustration 8.3).
5. Cut clamp 5, release the wire harness from holder 2 and move them away from the work area (see illustration 8.3).
6. Release the fuel lines from the holders 3, remove the clamp (see arrow in illustration 8.3), press the fasteners 1 and remove the air filter cover.
7. Replace the old air filter element with a new one.
Diesel Engine Cars
8. Remove cover 2 of the air filter, disconnect the air duct 1 (see illustration).
8.8. Remove cover 2 of the air filter, disconnect the air duct 1
9. Remove clamp 3, then disconnect plug 4 of the mass air flow sensor (see illustration).
8.9. Remove clamp 3, then disconnect plug 4 of the mass air flow sensor
10. Disconnect the air filter housing hose 2, press the four clamps 1 and remove the air filter cover (see illustration 8.9).
11. Replace the old air filter element with a new one.
Next, the installation of the dismantled components is carried out in the reverse order of removal.
This article was previously published on the resource AUDImanual.ru