Upper part of the oil. pallet
1. Bolt: 9 Nm.
2. Oil pressure regulating valve "N428".
3. Sealing ring: replace.
4. Upper part of the oil. pallet.
5. Lip seal: replace.
6. Guide sleeve.
7. Oil guide pipe. feeler gauge.
8. Screws: 9 Nm.
9. Sealing rings: replace.
10. Plug.
11. Lip seal: replace.
12. Oil radiator drain valve.
13. Lip seal: replace.
14. Guide sleeve.
15. Bolt.
16. Lip seal: replace.
17. Threaded plug: for the "TDC" mark; 25 Nm.
18. Vacuum pipeline: from the vacuum pump.
19. Bolt: replace; 3 Nm + turn further by +45°.
20. Sealing ring: replace.
21. Bolt: 9 Nm.
Upper part of the oil. pallet - last, and tightening torque of bolts
Replace bolts that were tightened with additional tightening.
Tighten the bolts in 3 phases in the specified sequence.
| Step | Screws | Tightening torque/rotation angle |
| 1 | "1...12" | 2 Nm |
| 2 | "1...12" | 5 Nm |
| 3 | "1...12" | turn 90° |