Dampers and dividers in the air distributor housing (Audi A4 B8)

1. Basis air distributor housing: assembled, do not disassemble.
2. Left half of the body.
3. The right half of the body.
4. Lever.
5. Defrost deflector flap.
6. Shaft.
7. Connecting rod.
8. Shutter in the deflector to the middle deflectors of the front panel.
9. Flap in the deflector to the left deflector of the front panel.
10. Connecting rod.
11. Flap in the deflector to the right deflector of the front panel.
12. The flap in the deflector to the deflector space. for legs in front left.
13. Connecting rod.
14. The flap in the deflector to the deflector space. for legs in front on the right.
15-17. Lever.
18. The flap in the deflector to the deflector space. for legs at the back left.
19. Val.
20. The flap in the deflector to the deflector space. for legs at the back right.

1. Comfort air distributor housing: assembled, do not disassemble.
2. Left half of the body.
3. The right half of the body.
4. Upper deflector housing.
5/6. Lever.
7. Damper in the indirect ventilation deflector. left.
8. Defrost deflector flap.
9. Damper in the indirect ventilation deflector. on the right.
10/11. Lever.
12. Flap in the deflector to the left deflector of the front panel.
13. The flap in the deflector to the deflector space. for legs in front left.
14/15. Lever.
16. The flap in the deflector to the deflector space. for legs at the back left.
17. Lever.
18. Flap in the deflector to the right deflector of the front panel.
19. The flap in the deflector to the deflector space. for legs in front on the right.
20/21. Lever.
22. The flap in the deflector to the deflector space. for legs at the back right.
23/24. Shaft.
25-28. Connecting rod.
29. Dividing wall: divides the air duct to the deflectors at the front and rear and is necessary to provide different temperatures of air supplied to the front and rear (depending on the position of the corresponding temperature valve).
30/31. Sleeve: glued into the divider.
32. Flap in the deflector to the middle deflectors of the front panel on the left.
33. Flap in the deflector to the middle deflectors of the front panel on the right.
34. Dividing wall: divides the air duct to the deflectors on the left and right and is necessary to provide different temperatures of supplied air (depending on the position of the corresponding temperature valve).
35/36. Flap in the deflector to the deflector in the center console, rear right.