Note: Replacement of windshield wiper blades, adjustment of nozzles and windshield wiper arms are described in Section 7 Chapter 1. Removal of the headlight washer nozzles is possible after removing the bumper cover (see Chapter 11).
1. Set the windshield wiper levers to the park position and remove the key from the ignition switch.
2. Use a screwdriver to remove the caps (3 in the illustration), and then loosen the nuts (4) located underneath them a few turns. Separate the levers (2) from the axles, loosen the nuts completely and remove the levers.
9.2. Windscreen wiper arm fastening parts
Note: If the arms do not separate from the axles, use a suitable puller.
3. Installation is performed in the reverse order of dismantling the components. After installation, adjust the levers.
(The original version is on the portal: AUDImanual.ru)