Table of contents: Removal ↓ Installation ↓
Removal
Unlock the service cover from the inside. Unlock the hood and pull it forward a little. Remove the hood. Turn on the ignition. Turn on "single wiper operation" and bring the wiper levers to the end position. Turn off the ignition and remove the ignition key. Using a screwdriver, remove the caps "3" and "4" on the double wiper lever. Loosen the double lever nuts by several turns. Sequentially loosen wiper levers "1" and "2" by tilting them away from the axes. Unscrew the nuts completely and remove the double wiper lever.
If the double lever cannot be removed in this manner, use a standard puller.
Installation
Installation is in reverse order, while it is necessary to adjust the wiper arm. Tightening torque: Wiper arm to axle: 10 Nm.