Removal and installation the windshield wiper nozzle and arm (Audi A4 B7)

1. Set the windshield wiper lever to the park position and remove the key from the ignition switch.

2. Carefully pinch the edges of the pad and remove it (see illustration).



3. Carefully separate the nozzle (2 in the illustration), loosen the nut (1) a few turns and separate the lever from the axle. Then loosen the nut completely and remove the lever.



4. Installation is performed in the reverse order of dismantling the components. After installation, adjust the lever.

The original article is posted on the resource: AUDIMANUAL