Removal and installation the rear window wiper motor (Audi A4 B7)

1. Remove the wiper arm (see Section 13).

2. Remove the lower section of the tailgate (see Chapter 11).

3. Disconnect the connector (2 in the illustration), disconnect the hose (1), loosen the nuts (arrows) and remove the electric motor.



4. Installation is performed in the reverse order of component dismantling. After installation, adjust the lever position. Tighten the electric motor fasteners with a force of 8 Nm.

The location of the SRS system components is shown in the illustration 15.0.

Note: The description of the removal/installation of the driver's front airbag is presented in Chapter 10.

[The original article is posted on the resource: Audimanual.ru]