Table of contents: Removal ↓ Installation ↓
Numerous covers and plastic trims are attached to the body using spring clips.
Removal
1. Remove the lining (3) from the hole (2). (1) – spring clamp.
Warning: This often causes the spring clip to break free from the trim and become stuck in the hole.
Installation
1. If necessary, use two screwdrivers to pull the spring clip out of the hole and insert it into the trim.
2. Install the trim onto the body so that the spring clips fit into the holes.
3. Press and fix the cladding.
(The original version of the article is posted on the website: «AUDIMANUAL»)