Table of contents: Letter designations ↓ Installation ↓
Remove the front panel trim on the driver's side.
Remove the left footwell air duct. Lightly press the clutch pedal "1" in the "direction of the arrow". At the same time, press the mounting clip "T40025" above the compressed servo spring "2". Press the clutch pedal all the way down and remove the servo spring with the mounting clip downwards.
Letter designations
| MKP | 6-speed 0B1, front-wheel drive | ||
| Letter designation | LYK | NAF | |
| Correspondence | 2.0 l TDI -100 kW, 2.0 l TDI -105 kW | 2.0 l TDI - 100 kW, 2.0 l TDI -105 kW | |
| Refueling volume | 4.3 liters | ||
Installation
Insert bearing shells "1" into the appropriate position.
| Bearing position | A/m with | |
| "I" "arrow A" | 2.0 l 120/125 kW TDI engine, 2.0 l TFSI engine | |
| "II" "arrow B" | 1.8 l TFSI engine, 2.0 l 88 kW TDI engine, 2.0 l 100 kW TDI engine, 2.0 l 105 kW TDI engine |
Insert servo spring "2". The black side "arrow C" faces the clutch pedal. Press the clutch pedal "1" until it stops and install servo spring "2" with mounting clip "T40025". Return the clutch pedal to its original position. At the same time, remove the mounting clip with the servo spring compressed.
Installing the footwell air duct. Installing the driver's side dash trim
(The article is a reprint of material from: «audimanual.ru»)