Remove shock absorber cover.
Loosen the nut securing the upper end of the shock absorber while holding the shock absorber rod with a hex socket wrench.
Slowly raise the rear of the car and remove the wheel.
Loosen the nut on the lower end of the shock absorber.
Remove shock absorber with spring.
Warning. Do not remove both rear shock absorbers with springs at the same time to prevent the brake hoses from being pulled out.
The installation of the shock absorber with the spring is carried out in the reverse order of removal, observing the tightening torques of the threaded connections. In this case, the lower cup of the spring must be directed, as shown in the photo.
Visitor comments