1. Oil filler plug (she is the control) installed on the left side of the transmission. behind the left inner hinge (pic. 27.1). Apply the handbrake, raise the front of the vehicle and set up the jack stands (see Jacking up the vehicle and installing jack stands). Remove the lower engine cover. To maintain the accuracy of the test, the vehicle must be installed horizontally.
2. Remove the plug. The oil level should be level with the bottom edge of the oil filler hole. If necessary, add oil of the prescribed type. The need for frequent topping up of oil indicates its leakage, which must be identified and corrected.
3. Replace the plug and tighten to the specified torque. Then lower the car.
Visitor comments