Mixing should be carried out, if possible, before the release of paraffin, because. otherwise, you will first have to clean the filter and pipelines from paraffin.
Because adding gasoline reduces power, a strictly defined amount of gasoline must be added.
Attention: Use only normal gasoline to add (leaded or unleaded), do not use super gasoline.
Due to the flammability of gasoline, mixing must be done in a gas tank. Fill with gasoline first, then fuel.
Attention: When adding gasoline, power is reduced.
If the engine does not start due to thickened fuel. it's very hard to get it going. For start:
Remove the fuel filters and heat in a water bath until the fuel is liquid.
Remove the fuel filter and replace it with a new one.
Roll the car into a heated garage.
Spray the fuel system with hot water.
BOSCH supplies a diesel heater for additional installation. An electric heater is installed in an additional pipeline to the fuel filter.
Caution: Never heat up the injection system or fuel tank with a blowtorch or similar device. Explosion hazard!
Visitor comments