Withdrawal
Raise the brush lever and place the brush horizontally.
Press the spring clip -A- and pull the brush downwards -B- out of the brush lever hook.
Slide it up and remove it from the brush arm hook.
Compress both steel tires with pliers from the closed side of the gum, remove from the upper bracket and pull out the gum complete with tires from the remaining brackets of the brushes.
Installation
Loosely insert new rubber -21- without bars into one brush bracket.
Insert both tires -22- into the rubber so that the tabs on the tires face the rubber and insert into the grooves of the rubber.
Compress both steel tires and the rubber band with pliers and insert into other brackets so that the noses of the brackets on both sides enter the groove of the elastic band.
Put the brush on the wiper arm and snap the spring clip into the lever box.
Lower the lever onto the glass. Make sure that the rubber band adheres to the glass along its entire length.
Visitor comments