Sedan
1 - bracket
2 - gas-filled spring stop
3 - bolt, 21 Nm
4 - nut, 21 Nm
Loosen to adjust size. Trunk lid/wing: 4.4+1 mm; trunk lid/rear window: 6.5+1 mm.
5 - cover stop
6 - hinge stop
Closed
7 - sealing washer
Coupe
Body side:
Open rear roof.
Press the pawl -1- as far as it will go.
Lightly tighten bolt -2- to 0.4 Nm.
Close the lid, the adjusting elements are set by themselves.
Tighten bolt -2- to 6 Nm.
From the side of the lid:
Open the trunk lid.
Set clamp -1- to dimension a = 12+1 mm and lightly tighten threaded rod to 0.4 Nm.
Close the trunk lid, the adjustment elements will take the desired position.
Tighten threaded rod -2- to 6 Nm.
Visitor comments