Fuel Filter (Fuel Injection Models) — Replacement (Audi 80 B3)

1. Block the front wheels, then jack up the rear of the car and support it on axle stands.

2. Install clamps on the hoses that go to the fuel filter.

3. Unscrew the connection bolts and disconnect the hoses (photo). Remove the sealing gaskets.



4. Unscrew the nuts, remove the mounting bracket and take out the fuel filter (photo).



5. Installation is carried out in the reverse order, but make sure that the arrows indicate the correct direction of fuel flow. Replace the sealing gaskets and tighten the connection bolts to the specified tightening torque Specification.

The original article is available on the website: AUDImanual