If necessary, you can use chemical leather care products. The main thing is that they do not contain solvents, otherwise you will damage the top layer.
The car is equipped with modern, reliable equipment that does not require special maintenance. The volume of routine maintenance is small, but necessary to maintain the constant readiness of the car for safe and economical operation.
High quality of assembly and components allowed to refuse additional maintenance immediately after running-in. Only for modifications with a diesel engine after the first 1000 km is it recommended to tighten the cylinder head nuts.
Technical inspection and maintenance is required after every year of operation or 30,000 km of mileage, whichever comes first.
Oil change is carried out after 15,000 km of mileage for cars with carburetor engines and 7,500 km for diesel engines.
The service book, among other things, indicates the volume of necessary routine work during each technical inspection, including when changing the oil.
If the vehicle is operated in difficult conditions, for example, at extremely low air temperatures, on dusty roads, etc., it is advisable to carry out some work in the interim periods. This primarily concerns:
- engine oil change;
- cleaning and replacing air filters;
- drying (dehydration) or replacement of the fuel filter of diesel engines.
It is best to do this at a service station, as this often requires special knowledge, machines and equipment. At the same time, these works can be carried out independently, following our recommendations and instructions.
When draining used oil, brake and coolant fluid, sorting batteries, changing worn tires, etc., it is necessary to take into account the requirements of environmental protection laws.
Passing confirmed technical inspections at a service station is taken into account when submitting possible claims under warranty obligations to the manufacturer during 1 year of vehicle operation.
