1. The A/C compressor is activated by a magnetic clutch which is part of the drive belt pulley. Usually clutch adjustment is not required, but if the pulley has been replaced, the clearance between the pulley and the clutch disc will need to be checked as follows.
2. With the engine and air conditioner off, check the gap between the pulley and the clutch disc with a feeler gauge, it should be 0.6-1.0 mm.
3. If necessary, unscrew the nut and remove the clutch disc. Adjust the number of pads. Install the clutch disc and tighten the nut after making adjustments.
Visitor comments