Check of position of the lever of a gear change
Engage 1st gear.
Move the gear lever all the way to the left.
Release the lever, measuring the amount of its movement, which should be within 5-10 mm.
Adjustment of a drive of a gear change
Working from below the vehicle, loosen the gearshift linkage fork.
Remove the shift knob and protective cover
Loosen the shift knob cap and align the alignment marks.
Install adjustment template VW 3014.
Push the shift lever and drive slide forward as far as it will go and tighten the clamping sleeve.
Move the gearshift lever to the 3rd gear line and tighten the nut of the gearshift linkage yoke bolt, working from below the vehicle.
Remove the adjustment template and check the amount of shift lever movement as above. If it differs slightly from the nominal. refine the adjustment by moving the cap of the spherical head growling and shifting in the oval slots for the mounting bolts.
Details of the gear shift control mechanism: 1 - gearshift lever; 2 — draft of a drive of a gear change; 3 - brackets of the transmission link; 4 - connecting tee; 5 - spacer sleeve; 6 - push rod; 7 — a stock of a choice of transfers; 8 - fork rods; 9 - fork rod leash; 10 — a rod of a fork of inclusion of a backing; 11 - drive lever reverse intermediate gear; 12 - fork switching III and IV gears; 13 - fork shifting I and II gears; 14 - clamps.
Visitor comments