ATF cooler, ATF lines, ATF line filter 1. ATF radiator: built into the coolant radiator; 2. Seal ring: replace; Lubricate with ATF before insertion; 3. ATF lines. return line: first insert the ATF lines with new sealing rings by hand until they stop; 4. Seal ring: replace; Lubricate with ATF before insertion; 5. ATF lines. straight line: first insert the ATF lines with new sealing rings by hand until they stop; 6. Bolts: 5 Nm; 7/19. Union nut: 29 Nm; 8/9/14. Bolt: 9 Nm; 10. ATF oil supply line: mark for installation to ATF lines; 11. ATF oil return line: mark for installation to ATF lines; 12. Locking clip: place the locking clip on the connection of the ATF line to the ATF line filter, and then pull to make sure that the locking clip is securely fixed; 13. Seal ring: currently cannot be replaced; if leaking, the ATF line must be replaced; 15. ATF main filter; 16. Bolt: 20 Nm; 17. Bolt: first insert the ATF line with new O-rings by hand until it stops; the ATF line mounting strip must be adjacent to the threaded hole in the gearbox; The upper ATF line mount must be adjacent to the lower mount; 20 Nm; 18. Seal ring: replace; lubricate with ATF before insertion
ATF cooler, ATF lines, ATF line filter 1. ATF radiator: built into the coolant radiator; 2. Seal ring: replace; Lubricate with ATF before insertion; 3. ATF lines. return line: first insert the ATF lines with new sealing rings by hand until they stop; 4. Seal ring: replace; Lubricate with ATF before insertion; 5. ATF lines. straight line: first insert the ATF lines with new sealing rings by hand until they stop; 6. Bolts: 5 Nm; 7/19. Union nut: 29 Nm; 8/9/14. Bolt: 9 Nm; 10. ATF oil supply line: mark for installation to ATF lines; 11. ATF oil return line: mark for installation to ATF lines; 12. Locking clip: place the locking clip on the connection of the ATF line to the ATF line filter, and then pull to make sure that the locking clip is securely fixed; 13. Seal ring: currently cannot be replaced; if leaking, the ATF line must be replaced; 15. ATF main filter; 16. Bolt: 20 Nm; 17. Bolt: first insert the ATF line with new O-rings by hand until it stops; the ATF line mounting strip must be adjacent to the threaded hole in the gearbox; The upper ATF line mount must be adjacent to the lower mount; 20 Nm; 18. Seal ring: replace; lubricate with ATF before insertion
Visitor comments