Mechatronic gearbox with twin-disc clutch «J743» (Audi Q5-8R)

Mechatronic gearbox with twin-disc clutch "J743" II 1. ATF drain plug thread; 2. Sealing cuff: replace; 3/6/10/38. Bolt; 4. Expansion rivet: in original equipment for fastening the ATF pan gasket; not required for installation; 5. Electromagnet: 2 pcs.; insert into the recess of the ATF oil pan; pay attention to the tight fit of the ATF oil pan; 7. Sealing ring: replace; 8. ATF pressure pipes (clutch release force); 9. Mounting plate: for ATF pressure pipes (clutch release force); 11/12/14. O-ring: replace; 13. ATF oil lines: different designs depending on the year of manufacture; 15. Sealing ring: replace; different designs depending on the year of manufacture; 16. Housing of replaceable ATF filter: for gearbox with replaceable ATF filter; different designs depending on the year of manufacture; 17. Sealing ring: for gearboxes with replaceable ATF filter; replace; 18. ATF replaceable filter cover: for gearboxes with ATF replaceable filter; 19. Replacement ATF filter: replacement when replacing ATF and after repairs to the gearbox; take into account compliance; 20. Bolt: for gearbox with replaceable ATF filter; 3 pcs.; 21. Sealing rings: for gearboxes with replaceable ATF filter; replace; 22. ATF oil return line: for gearboxes with replaceable ATF filter; 23. ATF oil supply line: for gearboxes with replaceable ATF filter; 24. Bolt: for gearbox with replaceable ATF filter.; 25. Bolt: for gearbox with magister, ATF filter; 3 pcs.; 26. ATF oil return line: for gearboxes with line, ATF filter; 27. Bolt: for gearbox with magister, ATF filter; 28. Sealing rings: for gearboxes with a main line, ATF filter; replace; 29. ATF line connector: for gearboxes with ATF line, filter; 30. ATF main filter: when replacing or repairing the gearbox, replace the ATF main filter; 31. Threaded plug of the filler and inspection hole for ATF oil; 32/36. O-rings: replace; 33. Bolt: 8 Nm; 34. Plug-in connector: to remove, unscrew the bolt "pos. 33" and turn the plug-in connector counterclockwise; 35. Carter KP; 37. ATF oil lines: different designs depending on the model, take into account the compliance; 39. Speed sensor cable guide; 40. Sealing ring: replace; 41. ATF suction filter; 42. Mechatronics of the dual-clutch gearbox "J743": after replacing the Mechatronics of the dual-clutch gearbox "J743", it is necessary to perform the corresponding "Guided function" using the diagnostic complex; disconnect printed circuit board from Mechatronic gearbox with dual clutch "J743"; 43. Gasket: replace; 44. ATF oil pan