Removal and installation the climate control unit (Audi A4 B7)

1. On models with a navigation system or with an audio system with a large control panel, remove the corresponding module (see Chapter 12).

2. Insert your hand into the resulting hole and push the climate control unit out of the clips (see illustration).



3. Press the connector latches (A, B and F in the illustration) and disconnect them. Loosen the screws (C), slide the shield (B) to the right and remove it from the control unit.



4. Installation is carried out in the reverse order of dismantling the components.

(The original article is available on the online resource: AUDIMANUAL)