Table of contents: Tweeter in the front door ↓ Tweeter in the rear door ↓ Subwoofer ↓ Loudspeaker in the instrument panel ↓ Removal ↓ Installation ↓
High- and low-frequency speakers are installed in the doors.
1. Disconnect the negative (-) battery cable.
Warning: Follow the instructions in Section Replacing the battery.
2. Remove the door trim, refer to Section Removal and installation the front door trim.
Tweeter in the front door
1. Press back the 3 locking strips (2) with a screwdriver and remove the high-frequency speakers (1).
2. Disconnect the speaker connector.
Tweeter in the rear door
1. Carefully detach the insulation boards from the back of the door trim in the area of the speaker.
2. Use a screwdriver to disconnect the locking bracket (1).
3. Remove the speaker (2) from the upholstery.
Subwoofer
1. Remove 3 screws (1) and take out the subwoofer.
2. Disconnect the speaker connector.
3. Further installation is carried out in the reverse order of removal.
Loudspeaker in the instrument panel
Removal
1. Disconnect the negative (-) battery cable.
Warning: Follow the instructions in Section Replacing the battery.
2. Loosen the screw (1) and remove the air nozzle near the windshield from the instrument panel.
3. Remove the 2 screws under the air nozzle and remove the speaker from the instrument panel.
4. Disconnect the speaker connector.
Installation
1. Installation is performed in the reverse order of removal.