Front lamp and reading light (Audi A4 B6)

1. For dismantling with the help of special tool 3370 (hook for the front; you can use a small flat screwdriver with a bent blade) carefully remove the ceiling cover.



2. Remove the screws (arrows).

3. Turn the lampshade down and remove it from the hole in the ceiling. Disconnect the connectors.



4. When installing in the reverse order, attach the lampshade and tighten it to a torque of 3 Nm.

5. To replace the bulbs in the front lamp, carefully remove the diffuser using hook 3370.





6. Remove bulbs 1 and/or 2 (10 W) from the holder.



7. Press the diffuser into the groove.

8. To replace the reading light bulbs, carefully remove the cover using the 3370 hook. Turn incandescent lamp 1 and/or 2 (5 W) and remove it from the socket.



9. When installing, which is done in the reverse order, press the cover so that it fits into the groove.

[This article was copied from the website AUDIMANUAL]