1. Jellied (she is the control) The plug is on the left side of the gearbox housing. under the speedometer sensor, in some models it can be hidden behind a heat shield (pic. 24.1). The cork may be "under the hexagon" 17 mm or "under the head Togh".
2. Apply the handbrake, raise the vehicle and install safety stands. To maintain measurement accuracy, the vehicle must be installed horizontally.
3. Remove the plug.
4. The oil level should be 7 mm below the lower edge of the filler hole. You can measure the level using a curved welding electrode or a piece of wire.
5. If necessary, add oil of the prescribed type, bringing the level to the prescribed level. If the oil requires frequent topping up. make sure there are no leaks, if found - eliminate.
6. Screw on the plug and sharpen it to the prescribed torque. Lower the car.
Visitor comments