Front seat - removal
1. Remove the trim tabs on the inner seat slide rail, and push the trim back off the rail.
Seats with manual adjustment
2. Remove the locking bolt on the front of the middle seat rail (see illustration).
Seats with automatic position adjustment
3. Remove facing of a pereda directing a seat from the right and left parties and turn out bolts of fastening which are under it.
4. Raise in front of the seat, unclench the wire harness clamp and disconnect the plug.
All models
5. Remove the seat by sliding it back. Before installing the seats, check that the seat sliders are not damaged. Otherwise, the seat will wobble.
Rear seat - removal
6. Remove the seat cushion. To do this, unscrew the two cross-head bolts from the front of the seat.
7. Remove the rear seat armrests. To do this, fold down the left armrest of the rear seat.
8. Remove an overlay from the right side of an average armrest of a back seat.
9. Remove the Phillips screws under the trim.
10. Remove the right armrest and back cushion.
The left armrest and back cushion are removed in the same way.
Visitor comments