2. Mark the exact position of the fixing plate in relation to the door panel, then remove the mounting bolts, two at the front and two at the back (photo).
3. Unfasten the inner door handle and remove the fixing plate (photo).
4. Remove the retaining ring and remove the washer and block that secures the window holder to the regulator (photo). Detach the window holder and lock it in the raised position.
5. Disconnect the regulator cable.
6. Turn off nuts or bolts and get a regulator.
7. If necessary, remove the window glass from the door.
8. Reassemble in reverse order, but adjust the window stop so that the top edge of the glass is fully in contact with the seal.
Visitor comments