Remove circlip -1- using circlip pliers. Using an electromagnet -arrow-, remove the drive shaft -2- from the oil pump. Unscrew bolts -3,4,5- and remove the oil pump. The idler gear bolt must not be loosened.
Installation
Install in reverse order, note the following. Replace seal. O-ring. Replace a damaged or stretched snap ring. The retaining ring should rest against the base of the groove. If the oil pump does not have centering sleeves -arrows- install them.
If the balance shaft module does not have mounting bushings for centering the oil pump, insert the mounting bushings. Install the oil pan.
Visitor comments