Oil filter bracket and oil cooler. I 1. Cover: 25 Nm; 2:4. O-ring: replace; 5. Oil filter element: follow instructions; 6. Oil radiator: follow the instructions; after replacement, change the coolant; 7. Bolt: 11 Nm; 8. Gaskets: replace; 9. Bolt: replace; 10. Oil filter holder: with built-in oil check valve; 11. Gaskets: replace
Oil Filter Holder - Bolt Tightening Sequence and Torque
Replace bolts that were tightened with additional turning.
First insert the bolts from the top left and bottom right. Tighten the bolts in 2 stages.
| Stage | Bolts | Tightening torque/angle of rotation |
| 1 | "arrows" | crosswise 14 Nm |
| 2 | "arrows" | turn crosswise by 90° |
(This article was copied from the website: AUDIMANUAL)