Table of contents: Height adjustment of front and rear… ↓ Height adjustment control ↓ Adjusting the front glass cover ↓ Adjusting the rear glass cover ↓
Height adjustment of front and rear sections
The front section is adjustable only at the front, and the rear section is adjustable only at the back. For the best appearance, it is necessary that the sections are adjusted equally on the left and right (symmetrically).
Height adjustment control
Check the adjustment of the front glass cover "1" and the rear glass cover "2", for example, using a depth gauge.
Size "a": 1.5±1 mm. Size "b": 1 + 1 mm. Size "c": 1±1 mm
Adjusting the front glass cover
Remove the trim. Loosen both front bolts "arrows" of the glass cover on the left and right. Close the glass cover. Adjust the glass cover "1" as shown in Fig.
Size "a": 1.5±1 mm. Size "b": 1±1 mm. Size "c": 1±1 mm
Tighten the bolts on the left and right (4.5 Nm). Installing the trim.
Adjusting the rear glass cover
Pull the inner seal "3" slightly inwards at the "arrow" locations and loosen the bolts "2" of the glass cover "1".
Adjust the rear glass cover "2" as shown in Fig.
Size "a": 1.5 +1 mm. Size "b": 1±1 mm. Size "c": 1±1 mm
Tighten the bolts (4.5 Nm)